| Item |
Unit |
DK511-8 |
| Interface |
|
ST506 |
| Total Capacity |
Formatted |
MBytes |
67.4 |
| Track Capacity |
Formatted |
Bytes |
6740 |
| Sector Length |
Bytes |
256 |
| Number of Cylinders |
- |
823 |
| Number of Heads (Data + Servo) |
|
- |
10+1 |
| Disk Speed |
|
rpm |
3600 |
| Power Requirements |
12V(MAX) |
|
A(MAX) |
5 |
| |
12V(TYP) |
|
A(TYP) |
2.5 |
| |
5V(MAX) |
|
A(MAX) |
2 |
| |
5V(TYP) |
|
A(TYP) |
- |
There are two kinds of Jumper Switches as follows :
- Green Jumper Switches
- Green Jumper Switches are used for customers choice such as DRIVE
ADDRESS and optional functions. Set up the jumpers as required, as
installing the drive or replacing the PCB.
- Black Jumper Switches
- Black Jumper Switches are used for servo circuit adjustments and
etc. These are already adjusted at shipment, therefore no need to adjust
at installation.
Fig. 6-12 DK511-8 JUMPERS AND CONNECTORS ON SZ124 PCB REV.1 or
2
Fig. 6-13 DK511-8 JUMPERS AND CONNECTORS ON SZ124 PCB REV.3
|
