Seagate ST3211A HARD DISK DRIVE REPAIR, Seagate ST3211A HARD DISK DRIVE SPECIFICATIONS,
Seagate ST3211A hard disk drive sales, Seagate ST3211A hard disk drive repair, Seagate ST3211A hard disk drive specifications, 
Seagate ST3211A Hard Disk Drive Repair, Seagate ST3211A Hard Disk Drive Specifications, Seagate ST3211A Seagate ST3211A
Specifications



seagate st3211a picture.
seagate st3211a picture.
seagate st3211a picture.

Seagate ST3211A Specifications
Model Capacity Size Height Bus Type Int.Type
ST3211A 210MB 3.5" SL IDE AT

Legacy   :    ST3211A
Legacy

Capacity: 
Speed: 
Average Read Time: 
 Cylinders: 
Heads: 
Sectors: 

213.4 MB
3600 rpm
14 ms
685
16
38


ST-3211A, Filepro 210 AT (Bobcat CFS210A)

  �����������ͻ
  � REAR VIEW �
  �����������ͼ

 Optional Mini Power
 Power Connector      J2 40 pin I/O Cable Connection
    ���Ŀ             �
    G   5  ����������  ��������͸ /���������\    TOP (HDA)
  ͵0 0 0�͵::::::::::�::::::::1�ͳ 0 0 0 0 ���
      12   ����������ͳ��������; ��5�G�G�12�    BOTTOM
                      �
                      ���� pin-20 removed


     ST-3211A
  ��������������ͻ
  �  Front View  �              �����  Compatibility Mode
  ��������������ͼ              �        ATA ON, ISA OFF
                                �
                                � ���  Master ON, Slave OFF (C/D)
                                � �
    (TOP)         o o o o o   o o o1
Option Block   ���  o o o o   o o o2��������������������
   (BOTTOM)       ���������   �
                      �       �
          Reserved ����       �
              Reserved  �������


                             ST-3211A
                    Filepro 210 AT (Bobcat CFS210A)

       FORMATTED CAPACITY _______________________213.4
       ACTUATOR TYPE ____________________________VOICE COIL
       CYLINDERS __PHYSICAL______________________2388
       HEADS ______PHYSICAL______________________2
       DISCS (3.5 in) ___________________________1
       MEDIA TYPE _______________________________THIN FILM
       HEAD TYPE ________________________________THIN FILM
       RECORDING METHOD _________________________ZBR RLL (1,7)
       INTERNAL TRANSFER RATE (Mbits/sec) _______20 to 32
       EXTERNAL TRANSFER RATE (Mbytes/sec) ______up to 7.5
       PIO MODE _________________________________
       DMA SUPPORT ______________________________EISA Type B
       SPINDLE SPEED (RPM) ______________________3600
       AVERAGE LATENCY (mSEC) ___________________8.33
       BUFFER ___________________________________32K
        Read/Write Multiple, Read Look-Ahead,
        Multi-Segmented
       INTERFACE ________________________________ATA
       SECTORS PER DRIVE (LBA mode) _____________
       TPI (TRACKS PER INCH) ____________________2774
       BPI (KBITS PER INCH) _____________________58,566
       AVERAGE ACCESS (ms) ______________________14
       SINGLE TRACK SEEK (ms) ___________________3
       MAX FULL SEEK (ms) _______________________25
       MTBF (power-on hours) Office _____________250,000
       SHOCK (G's):
                operating (Read/Write) __________5
                abnormal ________________________
                nonoperating ____________________75
       ACOUSTICS (bels) (typ/max) _______________43/
       POWER DISSIPATION (watts) ________________
       POWER REQUIREMENTS: +12V START-UP (amps) _1.2
       POWER MANAGEMENT (Watts):
                           ACTIVE _______________5.7
                           IDLE _________________3.8
                           STANDBY ______________1.9
       WRITE PRECOMP (cyl) ______________________N/A
       REDUCED WRITE CURRENT (cyl) ______________N/A
       LANDING ZONE (cyl) _______________________AUTO
       IBM AT DRIVE TYPE ________________________*

       Physical:
                        Height (inches/mm):  1.00/25.4
                        Width  (inches/mm):  4.00/101.6
                        Depth  (inches/mm):  5.75/146.1
                        Weight    (lbs/kg):   1.0/0.45


 * MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)


Possible translations: 685 cyl, 16 heads, 38 sectors = 213,237,760


Note: A "custom" or "user-defined" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

Already low-level formatted at the factory.

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.

Seagate reserves the right to change, without notice, product 
offerings or specifications. (02/21/96)

All manufacturer's Names, Logos and trademarks are the properties of the respective manufacturer.


HOME Seagate drives All Hard Drives


Check our Media Store for all your Floppy Disk and Tape Supplies.


Contact us

Copyright © 1997 - 2011 Erv Fleckstein ( M. Farris & Associates ). All Rights Reserved.