Seagate ST3123A HARD DISK DRIVE REPAIR, Seagate ST3123A HARD DISK DRIVE SPECIFICATIONS,
Seagate ST3123A hard disk drive sales, Seagate ST3123A hard disk drive repair, Seagate ST3123A hard disk drive specifications, 
Seagate ST3123A Hard Disk Drive Repair, Seagate ST3123A Hard Disk Drive Specifications, Seagate ST3123A Seagate ST3123A
Specifications



seagate st3123a picture.
seagate st3123a picture.
seagate st3123a picture.

Seagate ST3123A Specifications
Model Capacity Size Height Bus Type Int.Type
ST3123A 106MB 3.5" SL IDE AT

Legacy   :    ST3123A
Legacy

Capacity: 
Speed: 
Average Read Time: 
 Cylinders: 
Heads: 
Sectors: 

106.6 MB
3800 rpm
16 ms
1024
12
17
ST-3123A
                                                   4-pin DC
                 TOP                               Power
                           ����������� ��������͸/�4�3�2�1�\
                    ������͵::::::::::�::::::::1Ƴ 0 0 0 0 ��
                           ��������������������;��5�G�G�12�
                              (pin-20 missing
                               for keying purposes)
    (back of drive)
                    2o-o1 �������Ŀ
                     o-o  �����Ŀ �
                     o-o  ���Ŀ � �    (Options jumper located on bottom)
                    8o-o7 �Ŀ � � �
   (front of drive)         � � � �
                            � � � ��� Master OFF, Slave ON �����  0  0  1
                            � � ����� Slave Present ON ���������  0  1  0
                            � ������� Factory Test                �  �  �
                            �          (do not use)               S  M  S
                            ��������� Reserved                    i  a  l
                                                                  n  s  a
                                                                  g  t  v
                                                                  l  e  e
                                                                  e  r

                             ST-3123A


       UNFORMATTED CAPACITY _____________________
       FORMATTED CAPACITY (xx SECTORS) __________106.6
       AVERAGE SECTORS PER TRACK ________________ rounded down
       ACTUATOR TYPE ____________________________VOICE COIL
       TRACKS ___________________________________
       CYLINDERS ________________________________(user)
       HEADS _(PHYSICAL)_________________________2
       DISCS (3.5 in) ___________________________1
       MEDIA TYPE _______________________________THIN FILM
       HEAD TYPE ________________________________THIN FILM
       RECORDING METHOD _________________________ZBR RLL (1,7)
       INTERNAL TRANSFER RATE (mbits/sec) _______ to 21.1
       SPINDLE SPEED (RPM) ______________________3,811
       AVERAGE LATENCY (mSEC) ___________________7.87
       BUFFER ___________________________________32 Kbyte
        Multisegmented
       INTERFACE ________________________________AT
       BYTES PER TRACK __________________________
       SECTORS PER DRIVE ________________________208,896
       TPI (TRACKS PER INCH) ____________________2,400
       BPI (BITS PER INCH) ______________________42,700
       AVERAGE ACCESS (ms) ______________________16
       SINGLE TRACK SEEK (ms) ___________________5
       MAX FULL SEEK (ms) _______________________32
       MTBF (power-on hours) Office _____________250,000
       POWER REQUIREMENTS: +12V START-UP (amps) _1.0
       POWER MANAGEMENT (Watts):
                           ACTIVE _______________4.6
                           IDLE _________________3.9
       WRITE PRECOMP (cyl) ______________________N/A
       REDUCED WRITE CURRENT (cyl) ______________N/A
       LANDING ZONE (cyl) _______________________AUTO
       IBM AT DRIVE TYPE ________________________*

       Physical:
                        Height (inches/mm):     1.00/25.4
                        Width  (inches/mm):     4.02/102.1
                        Depth  (inches/mm):     5.77/146.6
                        Weight    (lbs/kg):     1.5/0.68


 * MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)

Possible translation:  1024 cyl, 12 heads, 17 sectors = 106,954,752

Note: A "custom" or "user-defined" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION
ZBR = Zone Bit Recording = Variable sectors per track

Already low-level formatted at the factory.

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.

Seagate reserves the right to change, without notice, product 
offerings or specifications. (05/12/93)

All manufacturer's Names, Logos and trademarks are the properties of the respective manufacturer.


HOME Seagate drives All Hard Drives


Check our Media Store for all your Floppy Disk and Tape Supplies.


Contact us

Copyright © 1997 - 2011 Erv Fleckstein ( M. Farris & Associates ). All Rights Reserved.