Seagate ST31200W HARD DISK DRIVE REPAIR, Seagate ST31200W HARD DISK DRIVE SPECIFICATIONS,
Seagate ST31200W hard disk drive sales, Seagate ST31200W hard disk drive repair, Seagate ST31200W hard disk drive specifications, 
Seagate ST31200W Hard Disk Drive Repair, Seagate ST31200W Hard Disk Drive Specifications, Seagate ST31200W Seagate ST31200W
Specifications



seagate st31200w picture.
seagate st31200w picture.
seagate st31200w picture.

Seagate ST31200W Specifications
Model Capacity Size Height Bus Type Int.Type
ST31200W 1052MB 3.5" SL SCSI2 W

Hawk 1LP   :    ST31200W
Hawk 1LP

Capacity: 
Speed: 
Average Read Time: 
 

1.06 GB
5400 rpm
9.3 ms



ST-31200W/WD/WC Fast Wide SCSI-2 (Hawk 1LP)

  �����������ͻ
  � REAR VIEW �  (ST-31200W/WD only)
  �����������ͼ
        (TOP)                   Auxiliary
          ___________________  ���  �1�/���������\
        �( �����������������1)ͳ::::::�� 0 0 0 0 ��
          \�����������ij����/  �  ��  ���5�G�G�12�
       68 pin I/O Cable�        ������
                                ������
                                ������
                                ������
        Auxiliary option header ������
           pin-11 +5v  ���������ٳ����
           pin-10 GND  ����������ٳ���
           SCSI ID = 8 �����������ٳ��
           SCSI ID = 4 �����������Ĵ��
            or pin-6 REFIND+ ������ٳ�
           SCSI ID = 2 �������������ٳ
           SCSI ID = 1 ���������������
           SCSI ID = 0 (none)


  �����������ͻ
  � REAR VIEW �  (ST-31200WC only)
  �����������ͼ
                     80 pin I/O and DC Power Wall/bracket Connection
                     �  Female
    J1          /���ij���������������\      TOP (HDA)
     ����������/ �������������������� \����������
              (\�1������������������40/)    BOTTOM

     Notes on 80 pin I/O connector:
       pins  1 -  4 = +12v        41 - 44 = 12v GND
            34 - 36 = +5v         74 - 76 = 5v GND
                 37 = SYNC             77 = LEDC
                 38 = MTRON            78 = DLYDST
                 39 = SCSIA0           79 = SCSIA1
                 40 = SCSIA2           80 = SCSIA3

  Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin
                                   2-557101-1 right angle to PCB

  �����������������ͻ
  � RIGHT SIDE VIEW �  (Both ST-31200W and ST-31200WC)
  �����������������ͼ


BACK   �͸       J2  12345678                    TOP (HDA)  FRONT
 OF    J1�����������������������P�W�A����������������������� OF
DRIVE  �;           ::::::::                    BOTTOM     DRIVE
                     ��������
   �Terminator Power ٳ������ Reserved
  ڴTerminator Power �ٳ����� Start Delay (12 secs * ID)
  �     Enable T-Res ��ٳ���� Motor Start
  �    Parity Enable �������� Write Protect
  �
  �
  � ��������������������������������Ŀ
  �Ĵ Termination Power-source Table �
    ����������������������������������������������Ŀ
    ������....�����....�����PWA edge�����          �
    �                                              �
    �  1 2     1 2      1 2                        �
    � �ķ       �ķ    ���ķ  A Drive Supplies Bus �
    � ���     ��    ����  B Drive Supplies Own �
    � ���     ���     � �   C Bus Supplies Drive �
    �   A       B        C                         �
    ����������Default�������������������������������
  Note: The model ST-31200WC drive cannot furnish terminator power,
because no pins on the 80 pin I/O connector are devoted to terminator
power.


  ������������ͻ
  � FRONT VIEW �  (Both ST-31200W and ST-31200WC)
  ������������ͼ


                      TOP (HDA)   J6  ������1�
     ��P�W�A�������������������������͵::::::��
                 *    BOTTOM          ������;
                 �                     ������
            LED ��                     ������
                                       ������
                                       ������
               Auxiliary option header ������
                  pin-11 +5v  ���������ٳ����
                  pin-10 GND  ����������ٳ���
                  SCSI ID = 8 �����������ٳ��
                   or pin-8 BUSY �����    ���
                  SCSI ID = 4 ������������ٳ�
                   or pin-6 REFIND+ ��     ��
                  SCSI ID = 2 �������������ٳ
                  SCSI ID = 1 ���������������
                  SCSI ID = 0 (none)

      If these ID jumper are used, then
         ID jumpers shown in left side view J5
         or 80 pin I/O cable ARE NOT USED.



                            ST-31200W
                            Hawk 1LP

       UNFORMATTED CAPACITY (MB) ________________1258.8
       FORMATTED CAPACITY (xx SECTORS) (MB) _____1055.28
       AVERAGE SECTORS PER TRACK ________________84
       ACTUATOR TYPE ____________________________ROTARY VOICE COIL
       TRACKS ___________________________________24,300
       CYLINDERS ________________________________2,700 user
       HEADS ______PHYSICAL______________________9
       DISCS (3.5 in) ___________________________5
       MEDIA TYPE _______________________________THIN FILM
       RECORDING METHOD _________________________ZBR RLL (1,7)
       INTERNAL TRANSFER RATE (mbits/sec)________26.8 to 47.2
       EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync
       SPINDLE SPEED (RPM) ______________________5411
       AVERAGE LATENCY (mSEC) ___________________5.54
       BUFFER ___________________________________256/1024 KByte
         Read Look-Ahead, Adaptive,
         Multi-Segmented Cache
       INTERFACE ________________________________SCSI-2 FAST WIDE
                                                 ASA
       TPI (TRACKS PER INCH) ____________________3000
       AVERAGE ACCESS (ms) (read/write)__________9.3/10.5
         Drive level without controller overhead
       SINGLE TRACK SEEK (ms) (read/write)_______1.2/1.7
       MAX FULL SEEK (ms) (read/write)___________19.4/20.4
       MTBF (power-on hours) ____________________500,000
       SHOCK (G's):
                operating (Read/Write) __________10
                nonoperating ____________________75
       ACOUSTICS (typ/max dBA) __________________/
       POWER REQUIREMENTS: +12V START-UP (amps) _1.9
                           +12V TYPICAL (amps) __0.37
                           +5V START-UP (amps) __0.65
                           +5V TYPICAL (amps) ___0.45
                           TYPICAL (watts) ______7
                           MAXIMUM (watts) ______
       WRITE PRECOMP (cyl) ______________________N/A
       REDUCED WRITE CURRENT (cyl) ______________N/A
       LANDING ZONE (cyl) _______________________AUTO PARK
       IBM AT DRIVE TYPE ________________________0 or NONE

       Physical:
                        Height (inches/mm):     1.00/25.4
                        Width  (inches/mm):     4.02/102.1
                        Depth  (inches/mm):     5.77/146.6
                        Weight    (lbs/kg):     1.5/0.68

Already low-level formatted at the factory with 9 spare sector
per cylinder and 2 spare cylinders/unit.

ZBR = Zone Bit Recording = Variable sectors per track

Seagate reserves the right to change, without notice, product 
offerings or specifications. (10/24/94)

All manufacturer's Names, Logos and trademarks are the properties of the respective manufacturer.


HOME Seagate drives All Hard Drives


Check our Media Store for all your Floppy Disk and Tape Supplies.


Contact us

Copyright © 1997 - 2011 Erv Fleckstein ( M. Farris & Associates ). All Rights Reserved.