Seagate ST31060W HARD DISK DRIVE REPAIR, Seagate ST31060W HARD DISK DRIVE SPECIFICATIONS,
Seagate ST31060W hard disk drive sales, Seagate ST31060W hard disk drive repair, Seagate ST31060W hard disk drive specifications, 
Seagate ST31060W Hard Disk Drive Repair, Seagate ST31060W Hard Disk Drive Specifications, Seagate ST31060W Seagate ST31060W
Specifications



seagate st31060w picture.
seagate st31060w picture.
seagate st31060w picture.

Seagate ST31060W Specifications
Model Capacity Size Height Bus Type Int.Type
ST31060W 1062MB 3.5" SL SCSI2 W

Legacy   :    ST31060W
Legacy

Capacity: 
Speed: 
Average Read Time: 
 

1.06 GB
5400 rpm
9 ms



ST-31060W SCSI-2 FAST Wide, (Barbados CFP1060W) 

  �����������ͻ                         ����� ID 8  Auxilary
  � REAR VIEW �                         ����� ID 4
  �����������ͼ                         ����� ID 2
                        (TOP)           ����� ID 1
                 68 pin I/O Cable       ����
                ___________________  ���  �1�/���������\
              �( �����������������1)ͳ::::::�� 0 0 0 0 ��
                \�����������������/  �  ��  ���5�G�G�12�
                 ���TRes��1         ���TRes��1
                 ����������   o�o   ����������
                 ���TRes��1    �
                 ����������    �                      (back)
                               �
                               �           o o   ���� Parity Disable
                 Term Power ����           o o   ���� Delay Spin
        Closed = Power from drive          o o   ���� Disable Spin
          Open = Power from interface      o o   ���� ID 8
                                           o o   ���� ID 4
                                           o o   ���� ID 2
                                           o o   ���� ID 1
                                              J7      ID 0 = no ID jumpers
                                                      (front) 

  �����������ͻ
  � REAR VIEW �  (ST-31060WC only, see adapter note below)
  �����������ͼ
                     80 pin I/O and DC Power Wall/bracket Connection
                     �
    J1          /���ij���������������\      TOP (HDA)
     ����������/ �������������������� \����������
              (\�1������������������40/)    BOTTOM

     Notes on 80 pin I/O connector:
       pins  1 -  4 = +12v        41 - 44 = 12v GND
            34 - 36 = +5v         74 - 76 = 5v GND
                 37 = SYNC             77 = LEDC
                 38 = MTRON            78 = DLYDST
                 39 = SCSIA0           79 = SCSIA1
                 40 = SCSIA2           80 = SCSIA3


    ST-31060W only                                         
  ��������������ͻ
  �  Front View  �
  ��������������ͼ

  (TOP)
                              J3

                        o o o o o   o o
               ��������   o o o o   o o ��������PWA��������������
                        � �������   � �
  (BOTTOM)              �    �      � ��� Spindle Synch
                        �    �      ����� LED Driver
                        �    ������������ Reserved
                        ����������������� pin removed


                            ST-31060W Barbados


       FORMATTED CAPACITY (MB) __________________1062.44
       AVERAGE SECTORS PER TRACK ________________94 rounded down
       ACTUATOR TYPE ____________________________ROTARY VOICE COIL
       TRACKS ___________________________________22,056
       CYLINDERS ________________________________2757 user
       HEADS ______PHYSICAL______________________8
       DISCS (3.5 in) ___________________________4
       MEDIA TYPE _______________________________THIN FILM
       RECORDING METHOD _________________________RLL (1,7)
       INTERNAL TRANSFER RATE (mbits/sec)________31 to 55
       EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync
       SPINDLE SPEED (RPM) ______________________5,400
       AVERAGE LATENCY (mSEC) ___________________5.55
       BUFFER ___________________________________512 KByte
         Read Look-Ahead, Adaptive,
         Multi-Segmented Cache
       INTERFACE ________________________________SCSI-2 Fast Wide
       BYTES PER TRACK (avg) ____________________
       SECTORS PER DRIVE ________________________
       TPI (TRACKS PER INCH) ____________________3147
       BPI (BITS PER INCH) ______________________65,131
       AVERAGE ACCESS (ms) (read/write)__________9.0/9.5
       SINGLE TRACK SEEK (ms) ___________________2
       MAX FULL SEEK (ms) _______________________16
       MTBF (power-on hours) ____________________500,000
       SHOCK (G's):
                operating (Read/Write) __________5
                nonoperating ____________________75
       ACOUSTICS (typ/max dBA) __________________43/
       POWER REQUIREMENTS: +12V START-UP (amps) _1.7
                           +12V TYPICAL (amps) __.3
                           +5V START-UP (amps) __.775
                           +5V TYPICAL (amps) ___.6
                           IDLE (watts) _________6.6
       LANDING ZONE (cyl) _______________________AUTO PARK
       IBM AT DRIVE TYPE ________________________0 or NONE

       Physical:
                        Height (inches/mm):        1/25.4
                        Width  (inches/mm):     4.00/101.6
                        Depth  (inches/mm):     5.75/146.1
                        Weight    (lbs/kg):      1.3/0.59

Already low-level formatted at the factory with x spare sectors
per cylinder and x spare cylinder per unit.

ZBR = Zone Bit Recording = Variable sectors per track


  �����������ͻ
  �  Adapter  �  (A small quantity of drives shipped with adapters.)
  �����������ͼ

             50 pin I/O Cable Connection
             �
          ������������  �����������͸ /���������\
    �����͵::::::::::::::::::::::::1�ͳ 0 0 0 0 ���ͻ
    � J3  �������������������������; ��5�G�G�12�   �
    �  ���TRes��1���TRes��1���TRes��1   ���������Ŀ �
    �  ������������������������������   �Jumpers  ���Ŀ
    � J2         /��������������������\ ����������� � �
    �������������/ �������������������� \����������ͼ �
                (\�1������������������40/)            �
                                                      �
             80 pin I/O and DC Power                  �
                                                      �
                                                      �
           (Horizontal style)  ������������������������
                                          �
                    DS                    �
            o o o o o o                   �
            o o o o o o                   �
            8 4 2 1   RS               (Vertical style)
            �������   �
                �     �� Remote Start ��� RS  o o
                �                       �� 1  o o
                ��� SCSI ID's (none ���Ĵ  2  o o
                     for ID0)           �  4  o o
                                        �� 8  o o
                    Delayed Start ������� DS  o o



Seagate reserves the right to change, without notice, product 
offerings or specifications. (07/31/97)

All manufacturer's Names, Logos and trademarks are the properties of the respective manufacturer.


HOME Seagate drives All Hard Drives


Check our Media Store for all your Floppy Disk and Tape Supplies.


Contact us

Copyright © 1997 - 2011 Erv Fleckstein ( M. Farris & Associates ). All Rights Reserved.