Seagate ST310232A Medalist HARD DISK DRIVE REPAIR, Seagate ST310232A Medalist HARD DISK DRIVE SPECIFICATIONS,
Seagate ST310232A Medalist hard disk drive sales, Seagate ST310232A Medalist hard disk drive repair, Seagate ST310232A Medalist hard disk drive specifications, 
Seagate ST310232A Medalist Hard Disk Drive Repair, Seagate ST310232A Medalist Hard Disk Drive Specifications, Seagate ST310232A Medalist Seagate ST310232A
Specifications



seagate st310232a picture.
seagate st310232a picture.
seagate st310232a picture.

Seagate ST310232A Specifications
Model Capacity Size Height Bus Type Int.Type
ST310232A Medalist 10.2GB 3.5" 1/3HT ATA-66 Ultra

Medalist 17242   :    ST310232A
Medalist 17242

Capacity: 
Speed: 
Average Read Time: 
 Cylinders: 
Heads: 
Sectors: 

10.24 GB
5400 rpm
9 ms
1023
256
63

ST-310232A (Medalist 10232 Ultra ATA/66)

  �����������ͻ
  � REAR VIEW �
  �����������ͼ
                         J2  40 pin I/O Cable Connection
                         �   pin-20 removed
                         �
              ���������� ������������������1�/���������\    TOP (HDA)
             ͵::::::::::�::::::::1� : : : : � 0 0 0 0 ���
              ����������������������8�ͳͳͳ���5�G�G�12�    BOTTOM
                                     � � � �
              Master ON, Slave OFF ��� � � �
    Slave Present (when Master ON) ���Ĵ � �
     Cable Select (when Slave OFF) ����� � �
                          Reserved ������� �
                    Limit capacity ���������

   Limit Capacity jumper sets the default cylinder translation
to 4092 to solve issues with certain BIOS that only auto-detect.
Total available sectors are still at full capacity as reported via
Identify Drive data words 52 - 61.  Third party partitioning software
may be needed to achieve full capacity if this option jumper is used.



                             ST-310232A
                          Medalist 10232 AT
 
       FORMATTED CAPACITY (MB) __________________10,242
       ACTUATOR TYPE ____________________________VOICE COIL
       CYLINDERS __PHYSICAL______________________
       HEADS ______PHYSICAL______________________6
       DISCS (3.5 in) ___________________________3
       MEDIA TYPE _______________________________THIN FILM
       HEAD TYPE ________________________________MR
       RECORDING METHOD _________________________EPRML 16/17 ZBR
       INTERNAL TRANSFER RATE (Mbits/sec) _______up to 188
       EXTERNAL TRANSFER RATE (Mbytes/sec) ______up to 66.6
       PIO/DMA/UDMA MODE (max) __________________4/2/4
       DMA SUPPORT ______________________________EISA Type B
       SPINDLE SPEED (RPM) ______________________5400
       AVERAGE LATENCY (mSEC) ___________________5.6
       BUFFER ___________________________________512K
        Read/Write Multiple, Read Look-Ahead,
        Multi-Segmented
       INTERFACE ________________________________Ultra ATA/66
       SECTORS PER DRIVE (LBA mode) _____________20,005,650
       TPI (TRACKS PER INCH) ____________________13,405
       BPI (KBITS PER INCH) _____________________up to 239.0
       AVERAGE ACCESS (ms seek/read/write) ______/9.0/10.5
       SINGLE TRACK SEEK (ms seek/read/write) ___/1.3/2.1
       MAX FULL SEEK (ms seek/read/write) _______/18/20
       MTBF (power-on hours) Office _____________400,000
       SHOCK (G's, 11ms/2ms):
                operating (Read/Write) __________/63
                abnormal ________________________
                nonoperating ____________________/300
       ACOUSTICS (bels) (typ/max) _______________3.3/4.1
       POWER DISSIPATION (watts) ________________
       POWER REQUIREMENTS: +12V START-UP (amps) _2.2
       POWER MANAGEMENT (Watts):
                           ACTIVE _______________8.5
                           IDLE _________________5.5
                           STANDBY ______________1.08
       WRITE PRECOMP (cyl) ______________________N/A
       REDUCED WRITE CURRENT (cyl) ______________N/A
       LANDING ZONE (cyl) _______________________AUTO
       IBM AT DRIVE TYPE ________________________*

       Physical:
                    Height (inches/mm):    1.03/26.1
                    Width  (inches/mm):    4.01/101.85
                    Depth  (inches/mm):    5.78/147.0
                    Weight      (lb/g):     1.2/558

 * MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE. (see below)

Possible translations:
                       This translation is generally acceptable, as
                       is, for non-DOS operating systems:
     16,383 cyl, 16 heads, 63 sectors = 8,455,200,780

                       DOS operating systems may require a translation
                       that uses larger values for the CMOS head
                       parameter which lowers cylinders below 1024:
       1023 cyl, 256 heads, 63 sectors = 8,447,459,328

                       Other FULL-CAPACITY solutions for DOS operating
                       systems include third-party drive preparation
                       software, system BIOS which supports LBA mode
                       or bios driven host adapters. Otherwise,
                       capacity may be limited to:
       1024 cyl, 16 heads, 63 sectors = 528,482,304


Some systems BIOS have capacity limitations. 
Types that have been identified are:
     a 2.113GB or 4095 cylinder limitation 
     a 3.262GB or 6322 cylinder limitation 
     a 4.22GB  or 8192 cylinder limitation
     a 8.45GB  Standard INT13 limitation (CHS[1024x256x63]x512)
and, if exceeded, may cause the system to hang during boot, 
capacity reduction or it can truncate or wrap the cylinders when 
auto-detect options set in the CMOS. FAT16 based operating systems
are also limited to 8.4GB.  New INT13 Extensions in BIOS and FAT32
based operating systems are both required to acheive full capacity.

DOS 16-bit FAT file system cannot access more than 2.147 Gbytes per 
partition.  FAT32 file system can create single partitions and
logical drives up to 2TB.

Note: A "custom" or "user-defined" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

Already low-level formatted at the factory.

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.

Seagate reserves the right to change, without notice, product
offerings or specifications. (06/14/99)

All manufacturer's Names, Logos and trademarks are the properties of the respective manufacturer.


HOME Seagate drives All Hard Drives


Check our Media Store for all your Floppy Disk and Tape Supplies.


Contact us

Copyright © 1997 - 2011 Erv Fleckstein ( M. Farris & Associates ). All Rights Reserved.