Seagate ST2383A Wren VI HARD DISK DRIVE REPAIR, Seagate ST2383A Wren VI HARD DISK DRIVE SPECIFICATIONS,
Seagate ST2383A Wren VI hard disk drive sales, Seagate ST2383A Wren VI hard disk drive repair, Seagate ST2383A Wren VI hard disk drive specifications, 
Seagate ST2383A Wren VI Hard Disk Drive Repair, Seagate ST2383A Wren VI Hard Disk Drive Specifications, Seagate ST2383A Wren VI Seagate ST2383A
Specifications



seagate st2383a picture.
seagate st2383a picture.
seagate st2383a picture.

Seagate ST2383A Wren VI Specifications
Model Capacity Size Height Bus Type Int.Type
ST2383A Wren VI 338MB 5.25" HHT IDE AT

Wren 6   :    ST2383A

Capacity: 
Speed: 
Average Read Time: 
 Cylinders: 
Heads: 
Sectors: 

338.0 MB
3600 rpm
16 ms
737
16
56

ST-2383A (94244-383) Wren 6 HH AT (IDE)
      ��������������������Ŀ                          /�������\
   ��͵1  AT (IDE) Cable   ��������������������������͵O O O O���
      ����������������������          o o o o o o o   ���������
                                      o o o o o o o    5 G G 12
                                      G F E D C B A
A  B
0  0  Factory use only
0  1  Drive is Slave, motor start delay 20 sec from master start-up
1  0  Drive is Slave, no motor start delay
1  1  Drive is Master, motor starts at application of DC power
C  D
0  0  Physical mode
0  1  Translate (logical) mode, sparing scheme is one sector
1  0  Translate (logical) mode, no sparing space allocated
1  1  Factory use only
E
0     Slave present, only meaningful on master
1     No Slave present
F  G
x  x  Factory test, position G may or may not be present by PWA


                             ST-2383A
                        94244-383 WREN 6 HH

       UNFORMATTED CAPACITY (MB) ________________383
       FORMATTED CAPACITY (54 SECTORS) (MB) _____338
       ACTUATOR TYPE ____________________________VOICE COIL
       TRACKS ___________________________________12,229
       CYLINDERS ________________________________1,747
       HEADS ____________________________________7
       DISCS ____________________________________4
       MEDIA TYPE _______________________________THIN FILM
       RECORDING METHOD _________________________RLL (2,7)
       TRANSFER RATE (mbytes/sec) _______________1.875
       SPINDLE SPEED (RPM) ______________________3,600
       AVERAGE LATENCY (mSEC) ___________________8.33
       BUFFER ___________________________________32 Kbyte
         Read Look-Ahead, Non-Adaptive,
         Single-Segmented Buffer
       INTERFACE ________________________________AT
       TPI (TRACKS PER INCH) ____________________1,459
       BPI (BITS PER INCH) ______________________31,699
       AVERAGE ACCESS (ms) ______________________16
       SINGLE TRACK SEEK (ms) ___________________3
       MAX FULL SEEK (ms) _______________________33
       MTBF (power-on hours) ____________________100,000
       POWER REQUIREMENTS: +12V START-UP (amps) _4.5
                           +12V TYPICAL (amps) __0.95
                           +5V START-UP (amps) __1.0
                           +5V TYPICAL (amps) ___0.75
                           TYPICAL (watts) ______15
                           MAXIMUM (watts) ______59
       BUFFERED STEP PULSE RATE (micro sec) _____
       WRITE PRECOMP (cyl) ______________________N/A
       REDUCED WRITE CURRENT (cyl) ______________N/A
       LANDING ZONE (cyl) _______________________AUTO PARK
       IBM AT DRIVE TYPE ________________________*

 * MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE.

Possible Translation:  873 cyls, 14 heads, 54 sectors = 337,913,856
Possible Translation:  737 cyls, 16 heads, 56 sectors = 338,100,224

Note: A "custom" or "user-defined" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION

WARNING - Already low-level formatted at the factory

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.

Seagate reserves the right to change, without notice, product 
offerings or specifications. (6/26/90)

All manufacturer's Names, Logos and trademarks are the properties of the respective manufacturer.


HOME Seagate drives All Hard Drives


Check our Media Store for all your Floppy Disk and Tape Supplies.


Contact us

Copyright 1997 - 2011 Erv Fleckstein ( M. Farris & Associates ). All Rights Reserved.